Questions & Answers for: switch doors

Ad

Question about Dishwashers

1 Answer

...supply is turned on. The valve may be located under the sink. Check the door latch Test the door switch Inspect the float assembly Inspect the fill tube for kinks Test the float switch Check the ...

Ad

Question about Clothes Dryer Almond Timer Knob Insert

1 Answer

Dryer knob sticks in one spot- won't move Maytag Performa Dryer 2200 Door switch / Door switch actuator leverThe dryer would not start with a broken door switch. Replace the door switch if found ...

Ad

Question about Clothes Dryer Almond Timer Knob Insert

1 Answer

how to change the dryer door switch how to change a Kenmore dryer door switch. how can remove the door pannel before change the door switch To remove the panel you need to undo two screws. How to take

switch is located on the instrument panel, left of the steering column. 2. Confirm doors are closed, lights are OFF, and the key is out of the ignition. 3. Disconnect the negative (?) battery terminal

After switching the ignition off and openinig the driver side door, the radio will not turn off automatically. The radio will turn off if the passenger side door is opened. Also the interior lights do

...that the door never locks to start a cycle. The door locking routine starts only if the door switch contact is closed (refer to page 6-2 of Job Aid L-68). This could mean the door switch ...

Question about 2000 Silverado 1500

1 Answer

doors. I opened door and found 5 wires, i asume 2 is door switch and other is central locking. Which colour is door switch wires so i can "short" them and determine witch door is at fault Hi

Question about 2009 Solstice Convertible

4 Answers

...Switch Malfunction. Command the doors to LOCK and UNLOCK with the scan tool, the door lock actuators should LOCK and UNLOCK when changing between the commanded states. ?‡' If one or more doors do not ...

...switch/es when all doors are closed, assuming the alarm system module (not sure of the name, some manufacturers call it body control module-'BCM') is good. you may try the following: 1. if there is, ...

...switch -- All the doors will lock or unlock from the end/lift gate lock switch. • The lockout prevention -- This function will prevent the doors from automatically locking if the keys have been left ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Brad Brown

Level 3 Expert

18157 Answers

Cindy Wells

Level 3 Expert

6068 Answers

Are you a Dishwashers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...