...hand will not zero out on the 12 To set the sweep arm pull the stem and crown out to the first or second set position then press and hold down the start button. The sweep arm will move into position ...
Question about Lefty Chronograph Watch with Band Goldtone 3329
...hand resets perfectly. Recently I bought another Lefty and had the same problem. I promptly returned it. Perhaps the movements for all these models are faulty. Wish Invicta would be more careful with ...
Question about Dive/Sport - ABYSS ALARM CHRONO DIVE WATCH ORANGE 2692
...SWEEP HAND DOES NOT REST TO " 0 " BUT RESETS ALWAYS TO JUST A SKOSH BEFORE THE 9? IS IT BROKEN? yHANK YOU - ED TRIBOU - BEVERLY, MA Hi Ed, I have been in the industry for the past 2 years as a ...
Question about 8928A - Two Tone Blue Automatic Diver Watch
Sweeping 2nd hand sticks at the 47 second mark Possibly the hands are touching or the sweep hand is touching the crystal
...hand sweep the face. If it stops not resting at the 12:00 position depress your top chronograph button until the second hand is aligned with the 12:00 position. Now you can depress the bottom ...
...large sweep hand is stuck in the 12\r\noclock position. Also how do you remove links from the stainless bracelet. It should never move unless you initiate the timing with the upper right hand
sweep hand is not moving Check this post out.. it may fix it. in my case however, it worked in position 1 and not position 2. https://www.keepthetime.com/blog/how-to-set-an-invicta-chronograph-back-to
Question about Subaqua Noma Iii S
...subaqua noma 3, i changed the battery but the seconds hand won't sweep, any ideas? its a sub aqua3, and changed the battery easy enough, but second hand won't sweep?? try a second ...
Usually answered in minutes!
44 Questions
1 Questions