Questions & Answers for: Kenmore supco pro81

...have an defective compressor relay/overload you can buy an replacement at an appliance store. supco make them just ask for an relay overload combination for 1/4 1/3 hp anyone with some electric ...

Modal # 253.748724400 Compresser comes on 5 seconds then cuts off, not cooling at all. check the start device. a supco rco410 3n1 will replace it

...the condenser coil, install a 3n1 start relay on the compressor. Installing Hard start Kit 3n1

Need to Install a Supco 3 n 1 start capacitor Hi I need to install a Supco 3 n 1 start capacitor and have a few questions. I have a Kenmore side by side fridge. Model # 106.53662300. My first question

...difference is the hose sizes. One will have a large and a smaller hose 3363394, or 3352293 (Supco LP116), the other both larger hoses 3363892 . Check that first. Those are the Whirlpool ...

...the compressor making the noise and not running you might want to try installing a hard start. The supco RCO-410 or RCO-810 are fairly universal parts and come with instructions and a picture on the ...

...to where you can buy piercing valves. http://www.globalindustrial.com/g/hvac/parts/ac_accessories/Supco-Acces-Valves If a window unit needs refrigerant , it would have corrosion & a leak in the ...

...compressor clicks and doesnt run its probably the start relay capacitor . I replaced mine with a supco RCO410 3N1 start relay kit from ebay. It cost me $12.50 and I installed it myself. Runs and ...

blue and white wires to compressor got wet, shorted and burned. Can scorched recepticles work again? Plastic "box" on side of comp. damaged where wires enter. Cut back and rejoin the wires ...

...in,hear a humm,then click? if so you may have a bad relay-overload.i replace a lot of these with a supco #410 that has connections for the relay and tape those wires to the relay.hope this