Questions & Answers for: Binks no suction

Spray is very fine or not spraying Are their air leaks making for no suction? Is my laquer too thick? Any air leaks in the suction portion of the machine will cause it not to spray or spray weak. This

Delivers the product but has a pulsating spray Binks Model 7 Delivers the product but has a pulsating spray resulting in a surface that is not uniform. I was spraying lacquer( before there was a ...

No suction My brand new Binks model #2001 conventional spray gun does not have enough suction to spray. I have tried increasing the pressure, no help. I have a few older Binks guns and they seem to ...

I have a binks model 7 repair kit. It has two leather type washers/seals and two smaller leather like washers. I believe two of the go as wipers or seals in on the shaft cap that the needle goes ...

Can you give me a detailed breakdown of the parts of this paint gun? http://www.tcpglobal.com/spraygundepot/bnk7-P.pdf take a look at this!

I bought a spray gun and wanted to know the difference between the two air caps one is numbered 36SD and the other is 67PD I have a binks spray gun. 67PD PE Used for Zinc rich and other abrasive ...

just whould like to know best pressure to spray acrylic enamel never used high pressure gun but came by this modle 7 binks if you can help tell me best may to set it up thanks That is a great old ...

what is the best setting for spraying dupont imron urathane enamel with the 92s activator because you used activator so the paint will be dried fast, therefore u probably want to paint it in a fast ...

fish eyes & overspray make sure you clean the surface with acetone or a degreaser and tack cloth before you spray