Question about QXE-108 Car Subwoofer
...subwoofer in a vented enclosure). If you have any other suggestions that will give me rock-solid bottom end performance (the lower I can have this sub play, the better - that is why my preferrance is ...
Enclosure be on RIP210DVC Car Subwoofer SpecificationsKey Features Type: Component Elements: 1-Way Function Subwoofer Size: 10" Powered: Non-Powered Nominal Power Handling: 500 Watt Technical Features
...enclosure for my s3.10.0 subwoofer, can someone advice what type of enclosure and what size it will be. Tnk u very much! hoping for good advice. Hello marne_glenn, Here's a link to Lightning Audio's ...
Question about (Pair) MAXP104D Max Pro Series 1200W 10" Subwoofers Car Speaker
want to find out the best type of enclosure for 2 lanzar max pro 124d subwoofers you best type of enclosure will be a sealed enclosure or you can build it with a partition in the middle seperating the
...subwoofer-enclosure--pid837745490/compareprices.html http://www.bizrate.com/carsubwoofers/audiobahn-abb101v-10-in.-subwoofer-enclosure--pid837745500/compareprices.html Here are a few boxes made for ...
...enclosure is custom made for the amound of Xmax, QMS and specs of the subwoofer. Putting a bigger sub would acutally not sound as good as an 8, because the box was calibrated for it. Get an enclosure ...
Question about TS-W307D2 12" 1200 Watt Champion Series Subwoofer - 2Ohm Car Subwoofer
...subwoofer enclosure for a 12" pioneer champ series TS-W307D2 Design and Specifications 12? Dual Voice Coil (DVC) Subwoofer for Enclosure applications 1,200 Watts Max. Power Handling 400 Watts Nominal ...
...4710 subwoofer, I would recommend going with a 1.25 - 1.75 cubic foot sealed enclosure, or a 1.5-2.0 cubic foot ported enclosure (the port should be 3" or less in diameter and at least 10 inches
...enclosure. Unplug the subwoofer from the amp. Your next step is to unscrew the 4 10mm bolts so that you can remove the sub enclosure. At this point you can now remove the enclosure. It will take a ...
...ea. You will only be able to use 1 subwoofer in this application. Even a sealed enclosure is recommended 1.25cuFt. You can shove 2 in the vented enclosure, but you may not be happy with the ...
Usually answered in minutes!
687 Questions
481 Questions
236 Questions
236 Questions
240 Questions