Question about Alarm Lock T2 TRILOGY® Digital Locks DL2700
code change for trilogy lock D2700 code change First find out if you are dealing with a D2700 or the newer enhanced version. Press any 2 buttons and *,if you get a green LED and 6 beeps it is the new ...
Question about Alarm Lock T2 TRILOGY® Digital Locks DL2700
Trilogy dl 2700 serries digital lock program managers code I have the trilogy dl 2700 series digital lock, I can get the master code to react and open the door, however I can't get it to go to an ...
Question about Alarm Lock T2 TRILOGY® Digital Locks DL2700
Lock remains unlocked at all times. I have changed codes from old code to new code. The lock takes the code and green light comes on but the lock does not relock. The lock is probably in passage mode,
Question about Alarm Lock T2 TRILOGY® Digital Locks DL2700
how do you change the master code in the computer to match the master code on the door locks? The locks are the Alarm Lock 3000. I understand the master code in the locks must be the same as on the ...
Question about Alarm Lock T2 TRILOGY® Digital Locks DL2700
master and enter a user access code. Cannot do either Trinity Keyless Biometric lock: I can't answer your question directly, but I can steer you to their website, which includes a support phone number
Question about Alarm Lock T2 TRILOGY® Digital Locks DL2700
...support and Frequently Asked Questions: http://www.axxisbiometrics.com/products/locks/latch-style/trinity788/ I'm sure they can answer your questions. Good
I changed the battery on my DL2700. The door is closed and the lock recognizes my old code.. the light turns green but the lock will not engage to open the door. this was installed 13 years ago and I ...
I am trying to restore the factory default programming by following the steps in the instruction manual but it does not reset fully. I disconnect the battery, I press and hold any number from 1-9 for ...
Question about Alarm Lock T2 TRILOGY Digital Locks DL2700
I have a trilogy lock. I use only the master code. It accepts the code like it is working but you can't open the door.It stopped working and then started working again and now it quit again. Is ...
reprogram master code on the keypad press the following... (old master code) wait for green light press and hold AL key until multiple beeps are heard. this puts you into program mode. TO ENTER NEW ...
Usually answered in minutes!
68 Questions
27 Questions