Questions & Answers for: Hotpoint stuck on test

stuck on TEST my machine is not working. it displays test on the screen, is there any way i can get out of test mode?? is there any buttons to press. help i have children. I have just experienced this

...stuck in Test mode, simply hold the start button down until it comes out of test mode, then hold both the start buttons and the on/off button down until you see ?D:end? (or similar message)." I had ...

test on display cant use washer i have an hotpoint ulima wt965 and it is stuck on tset and i can not use washing machine at all it runs through the test cycle and then does the same when i switch it ...

the hotpoint WD640P washing machine is stuck on 'test' The washing machine is stuck on 'test' turn the machine on while preesing the on and start buttons together until dOFF appears.

wd640 stuck on test hi, i have a wd640 super silent but it al it says is test on display, plz help hold both buttons in until dsiplay clears

...stuck in a test cycle, I can cancel by pressing both start and the on/off button but when I try to start a new cycle it reverts back to test. try and unplug it for 3 mins and plug back in that might ...

...Error code F05 means water level switch is stuck on full. Remove lower rear panel of washer. Remove large black hose on bottom of drum. Remove and clean plastic filter inside hose. Refit and

my machine is stuck on test can u help switch the unit on,then on/off together with the start button,you should get the D.off display showing,then it should work o.k.

stuck in Test mode, simply hold the start button down until it comes out of test mode, then hold both the start buttons and the on/off button down until you see 'D:end' (or similar message). Now try a

...all lights on the display are lit, almost like it is stuck in lights test mode. Switching power on and off is no help. Most likely a control board issue ONLY OPTION YOU HAVE A IS CALL A REPAIR ...