Questions & Answers for: Fisher and Paykel stuck drawer

drawer before it got stuck were cleaned. And there is nothing blocking the drawer from opening. It seems like the seal that covers the drawer when its closed has lowered and is not raising up anymore.

...drawer locked (stuck) open bottom drawer of two drawer dishwasher F&P DD-6603ss is half open and appears locked (stuck) can't open or close it. After cycle finished opened ok next morning but now ...

...in and pull the drawer out. You can lift the drawer up and push the slides in to get them out of the way. Then you should be able to see into the cabinet and what if anything is stuck behind the ...

drawer are stuck in Rinse/Eco :( Hopefully I can find how to change the control board on this site. I have had this problem too. You need to make sure the top lip of the inside of the drawer is dry. I

...stuck top drawer of dishwasher would not open easily. when opened, would not close. it appears that the lid is stuck in the closed or partially closed position and the drawer cannot be pushed in. i ...

...drawer are stuck due to lack of power and therefore you cannot close the drawer. Don't try to force it in as this will cause damage.First thing to do is to restore power to the drawer. The power ...

...drawer is stuck and wont slide, the power light is on but the buttons will not work. this only effects the top drawer the bottom seems just fine please provide the model number of the dishwasher so ...

...drawer stuck closed how to fix. What is problem and how to fix. Turn the mains power off and force pull the drawer slowly.. No jerky movements. The lid seal is stuck. Once open, check for any damage ...

...power and back on and see if there is any change. The drawer lid is stuck in close position when you opened the drawer. Try to select another program on the panel and see if it clears the stuck

lid seal motors are stuck and will not let the drawer open. Turn mains power off and pull the drawer. Will need to replace the controller on this drawer. I am assuming the other drawer is working fine