Questions & Answers for: Lexmark stuck bin

Lexmark c530dn printer Looks like a label is stuck in printer Hi there the best thing is to use an alcohol based cleaning fluid and a soft cloth. Spray the label with the fluid after removing all ...

The sheets being printed are gray instead of white, like the ink is all over them. I seem to have just solved this problem on my C522. On the back of the transfer belt assembly there is a black ...

My Lexmark C510 printer will print one sheet fine and then give me an error, "201 Paper Jam, Open Rear Door". If I turn the printer off it will reset and I can print one sheet again and will get the ...

printer is requesting remove paper/standard bin This means the flag in the output bin got stuck or there is some dirt in the sensor of this flag.

We are having issues with our C534n Printer. It is showing waste toner is full. How do we find this and correct the action? as you look at the printer from the front, on the lkeft hand side there is a

will only print maybe one page of a 4 page document and sometimes wont print at all Below are 3 possible solutions. Unexpected page breaks occur Cause Solution Job has timed out. Set the Print Timeout

My printer is displaying the following message - 122.03 Service Fuser Error. Can you tell me what this means? This means the fuser unit is defective and needs to be replaced. Depending on your ...

I get error message "waste I get error message "waste toner box full -82". What do I do? I cannot find any waste toner box - have no idea where to look or what to do. Open the right side ...

output bin full error flag broke You need to replace the Output Bin Flag. Please call our Technical Support Hotline on 1-800-539-6275 or contact an Authorized Service Provider near to you (click ...

Also check the fuser, they sometimes get sticky and pull the toner off the paper. Look for anything stuck to the fuser's rollers. Also check the print outs by rubbing them to see if the toner is stuck