...kind of noise like grinding or cracking. i was told it was the axle and i also was told it was the struts upper strut ...
...Strut 5 Crossmember 6 Stabilizer bar 7 Front arm 8 Rear arm 9 Wheel spindle 10 Tie-bar 11 Dust cap 12 Brake drum 13 Hub retaining nut 14 Hub and bearing assembly 15 Backing plate 16 ABS sensor 17 ...
...bearing, spring seat and dust shield. Remove the coil spring from the strut. Remove the jounce bumper from the strut. Replace the coil spring or the strut as needed. To install: Reinstall the jounce ...
replaced all 4 struts, stills rattle in the front end, when steering turns and small bumps Check your brake pads and calipers. Then check your heat shields for stones. Some Ford products had bearings ...
bearing, worn strut mount or ball joint can do this. also a bad master cylinder, broken/leaking brake line, contaminated brake fluid, bad porportional valve, or unevenly worn rotors can all cause this
...strut top bearing plates could be worn Not the struts,the bearing on top of struts under the hood, you can see with the nut holding the top of the struts If you fail to change your power steering ...
Usually answered in minutes!
1,305 Questions
630 Questions
345 Questions
361 Questions
333 Questions