Questions & Answers for: Jeep Grand Cherokee strut bearing

...strut or a wheel bearing. you can inspect these things by 1: while in park turn the wheel from side to side while you have someone inspecting looking for things that are loose 2: jackup the car just ...

...bearing assembly is what you need. They actually make this all sound so difficult but let me tell you how I just did the same job on my Murano 06 AWD that uses the same type of assembly. Remove the ...

...the rear axle not tracking right with the front axle/tires, a loose or broken shock absorber or strut, a loose or broken motor mount or transmission mount, and then there is the drive shaft, and

...big clunk after a certain point Have you checked the condition of you upper control arm bushings? and also could be your upper strut mount (bearing plate) and another possibility would be ball ...

out clip located on the strut...this must be pulled out to release the strut from the bearing with no damage...you might inspect the replacement strut for this clip as it is included in the new part..

...that the front end is out of alignment, that you have a bent wheel, or that you have a bad/weak strut/shock. When the tires were balanced the technician should have been able to see if the tire ...

my 1998 grand jeep cherokee, when I turn a corner my tires sqeal and the jeep doesn't want to move what could be wrong with it besides checking tire size and tire pressure the first thing you want

thumping noise in right wheel when driving 02 kia sedona Bought an 02 KIA sedona. Replaced brakes then noticed a humming behind steering wheel, this was followed by a sound that seems to be in the ...

...now for 100 years. 1: tires out of balance or bad, (budges , de-laminating cords,damge) 2:shocks struts end of life, making above 10x worse. 3: any suspension parts or steering parts damaged here. ...