Questions & Answers for: Volkswagen strut bearing

...sound in front suspension over bumps. 2001 VW Golf. knocking sound in front suspension over bumps. Struts and bearings are new. drive shafts good. sway bar feels tight. no looseness that I can find ...

...strut. Pull the spindle off the axle splines. Take the spindle to a press to push out the hollow stub axle. Remove the bearing retainer. The press out the bearing. Do not use a hammer instead of a ...

...mounts....strut rod bushing....axle....inner/outer cv joint....calliper pins......shock/shock bushing...or wheel bearing. im hoping tio get all this checked out its got to be able to be fixed

I need to install front bearings for a VW fox 2005. ¿can you help me? are there any special tools needed other than sockets?... thank you That is a specialized job. The front struts have to be ...

...wing) That is fine as long as it is not loose and making noise when you are driving. In some cases this is a sign that your strut bearing rubber bushing assembly are wearing out and need

...and unbolt the 2 bolts holding the spindle to the strut housing. You need to press out the wheel hub and remove the clips on either side of the bearing and press out the bearing from the

...to the hub, wheel bearing will be crushed from vehicle weight. You can use a 1/4" extension end placed on the slot to spread the strut carrier wide enough to release the strut from the

...strut bearing. If you don't have an air gun to remove the nut there are tools available from online tool shops. A 1/2" drive breaker bar is attached on top of the tool while an allen wrench seen in ...

strut broke after the first bearing failure, the other a short time later. He said with struts being broke, the wheels/tires were sitting/rolling at an incorrect angle, causing the bearings to go bad.

strut housing properly and is rattling around inside it. Springs are just springs and support the weight of the vehicle so it will be under load of the vehicle at all times. Check that the top bearing