Questions & Answers for: strut bearing

Ad

Question about 1993 Camry V6

1 Answer

93 Camry strut replacement. The struts on my 93 Camry (175k miles) are shot. Should I replace a)struts only b) struts + mounts, or c) Struts, mounts and spring seats/bearings? If you plan on keeping ...

Ad

Question about 1999 Maxima

1 Answer

...mounts and bearings. Usualyl due to age the mount/bearing will cause noise/steering issuse and the dust boots are there to help the struts last longer by not letting water/dirt ruin the strut ...

Ad

...struts when turning , where is the rotating bearing on the strut can I greace the bearing or thrust surface with a greace needle You can Try to Lube them But I Haave Always Replaced the ...

Question about 1999 Venture

1 Answer

...strut bearing - Does anyone know what the easiest way for replacing the strut bearing is? The more detail the better! If you don't have a strut compressor then the easiest way is to remove the struts ...

...end,,,, ive replaced the bearings i have new ball joints and its a 2wd This sound is most likely strut bumpers and the strut plate bearings are loosening up, they are at the top of the strut

Question about 2002 Cougar

1 Answer

...bearing, spring seat and dust shield. Remove the coil spring from the strut. Remove the jounce bumper from the strut. Replace the coil spring or the strut as needed. To install: Reinstall the jounce ...

Question about 1998 Aurora

1 Answer

...if you do the "quick strut" which will replace the springs, struts and bearing if you do just the struts around $300 but then you'll be paying a lot more latter when the springs and/or bearings ...

...strut is mounted at the bottom on a bearing in the lower control arm. This lower bearing is of a 'ball in socket' type to allow both rotation when steering and the up and down movement of suspension ...

out clip located on the strut...this must be pulled out to release the strut from the bearing with no damage...you might inspect the replacement strut for this clip as it is included in the new part..

strut bearing keeps going bad ,WHAT IS CAUSING IT? SECOND ONE GONE BAD If you just replaced bearing & not plate & strut &/or spring these are what are causing it to wear out. Always ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

23438 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...