Questions & Answers for: Chevrolet Venture strut bar

removing and installing trunk struts in chevy venture 2003 How can I extend the strut when I intalled in one of the parts? The trunk lift supports (struts) come fully extended. Install one end of the ...

noisy struts when turning where is the rotating bearing noisy struts when turning , where is the rotating bearing on the strut can I greace the bearing or thrust surface with a greace needle You can ...

changing the strut bearing - Does anyone know what the easiest way for replacing the strut bearing is? The more detail the better! If you don't have a strut compressor then the easiest way is to ...

replacement procedures for front struts on chevy venture lx lift and safely support vehicle (jack stands),remove wheel and tire assemblies, remove strut to knuckle bolts (two bolts and nuts located ...

...near you they be able to tell you wish you the best Michigan Man. Remove the 3 bolts holding the strut slide the fuse box off the strut and remove the bolt holding the fuse box onto the front ...

i need struts and shock for my van. how many struts and shocks do i need? it should have two struts up front with coil springs and two shocks in the back with leaf springs so two of each

...back side of the axel that keeps the van from swaying back and forth sway bar links or stabilizer links? One end is attached to the stabilizer bar and the other end is attached to the strut I

I have a 2000 chevy venture van and it is rusted out so bad around my strut mount area now I cant bolt down the strut mount, because I don't have any thing to bolt it to its very brittle. Can it ...

rattle\squeak drivin over roughroad sounds like struts! have someone follow you and see which wheel is bouncing... (or wheels?) replace that strut on a budget, or do them in pairs...

...strut. 3 bolts at the top and a sway bar link to disconnect in the wheel well and 2 bolts at the strut/hub.If you do not buy an assembled strut DO NOT try to remove the spring without a GOOD spring ...