...either side of the frontend. In the cabin the sound is coming high in the dashboard. I've had the struts and mounts changed but the noise is still there. Ball joints, motor mounts, sway bar link ...
...strut) wears out, and you replace those at the same time as the spring seat rubber cushions. Either of them failing can lead to a crunching noise. Not only that, but the lower control arms have ...
...bar links and upper strut mounts if all check out ok change the struts check under car for problem, broken parts, etc., push on car it should just bounce once then come to rest, look at top of ...
...bar drop link that is worn easy to replace I had a similar noise, I took apart the strut and the bushing on top of the strut was falling apart. Replaced it with a new one for under 100.00. No more ...
...but I still here the rattle. What could be causing the problem? have they checked the sway bar stabilizers,or if a lower control arm bushing has moved out of place.or maybe a strut bushing and ...
bar move the wheel up and down noting if there is a sound also check the strut for broken rubber boot or and broken spring, wile your under there check the tie rods for any ware this should get you on
...strut supports are a common problem on this model. You can check by putting a 21mm socket and 1/2" ratchet on the top shock nut. This may be covered by a plastic cap that is easily popped off. If it ...
...would be more likely if it was making noise when turning. Could also be a spring/strut/sway bar or other suspension component in need of lubrication, depending on how long the creaking lasts,
Question about 2008 V50
bar on each strut tower. 4 in total. Remove the bolt that goes through the mount you will need to hold the nut or bolt while turning the other. Put the cross bar aside and unbolt the mount. Remove and
Usually answered in minutes!
664 Questions
682 Questions
587 Questions
551 Questions
468 Questions