...assembly replaced and some really old spark plugs replaced. Is there anything you'd suggest? Would brake fluid or steering column fluid come into play here on a '98 Explorer? Thanks, Owen Have the ...
...repairs and do not buy any parts untill you get back to me cause they will try and sell you the whole strut assembly and you do not need that sounds like your upper control arm bushings are worn
...strut as an assembly. You'll need a spring compressor to safely remove and install the new spring. It is always recommended that you replace the front springs as a pair (both side). This job may be ...
...can i still drive it I quess you mean rubber ring under front spring. I would pull the spring/strut and replace whatever it needs. It will effect ride height to some extent,thus alignment,and ...
...the removal of the lower control arm to knuckle bolt and the removal of the stabilizer link. This will allow you to leverage the lower control arm low enough to get the strut assembly in and
Question about 2005 Explorer
...the top center nut that holds the strut assembly to that bearing plate assembly should be 76 ft lbs (with the use of a spring compressor of course!) wheel lug nuts should be torqued to 98-100 ft ...
Usually answered in minutes!
2,998 Questions
2,307 Questions
2,248 Questions
2,302 Questions
1,513 Questions
