Questions & Answers for: Nissan strut assembly

Rear Strut Replacement I'm looking to replace the rear struts, but I'm unsure if I should replace the entire assembly (springs, etc) or just the cartriges. cartridges

...strut from knuckle/Hub assembly. Then loosen nuts on strut tower( on top of fender inside hood) (3) nuts, mark exact locations of each nut on strut mount area on upper fender weld. Make sure to hold ...

...strut assembly? the mounting bracket for sonar adapters is in the way of the strut center bolt. First you must remove the rear seat to gain access to the top strut mounts. The bottom of the rear seat ...

Strut Assembly for nisan maxima 2000 model, driver side and passenger side thanks Raise the car and remove the wheels. Loosen the bolts holding the strut to the steering knuckle. Before removing them,

assembly with strut, sping, and mount. This is the best way to buy if you doing them yourself. A little more expensive but you are replacing everything and will not have to take them to a shop to have

Does a Nissan Maxima have rear struts ? its actually a shock with a strut like assembly strut cartridge top and shock mount on the bottom I guess its a mutt...

strut assembly and the other is just the strut itself. If you know where to get spring compressors you can use those to compress your old springs and use them on the New strut, usually saves money. If

...strut assembly for $500. Right out of the shop I had no spring and they bottomed out over speed bumps. Went to MD state inspection and they said I need rear struts and mounts - struts leaking ...

...assembly to put in that top bolt on the bottom of the strut... Does anyone have a solution for my problem? i used a c clamp to pull the assembly in and put the top bolt in first , then i put the ...

take the quick strut option faster safer and better for your application any auto parts store should carry the quick strut assembly hope this helps u on your journey to a smooth ride regards Chris ...