Question about OfficeJet 7310 All-In-One InkJet Printer
...etc Someone has just replaced the cartridges in our office printer and now it misses a half inch strip of the page in rows about 2 inch's apart all the way down a page whilst printing black and ...
...the inside of it is probably coated in ink spray. Over time this spray will build up on the encoder strip and cause print image defects. You can just clean the encoder strip for a temporary fix but I ...
...reach room temperature. Plug in the power cord. 4. The issue can also occur if the white reference strip for the scanner assembly is missing or dirty. For information on cleaning the scanner strip, ...
Question about OfficeJet 5110 All-In-One InkJet Printer
...before reconnecting the power cord. 5. The problem can also occur if the white reference strip for the scanner assembly is missing or dirty. For information on cleaning the scanner strip, ...
Question about OfficeJet 4215 All-In-One InkJet Printer
HP 56/57 cartridges. When you buy new cartridges you need to remove the black clip, then remove the strip of tape that covers the print head, then the cartridge can be installed in the printer
Question about OfficeJet V40xi InkJet Printer
...room temperature. Plug the power cord back in. The issue can also occur if the white reference strip for the scanner assembly is missing or extremely dirty. Clean or replace as
Question about Officejet Pro L7590 All-in-One InkJet Printer
...by the user instead of purchasing brand new ones or that the copper contacts (gold coloured strip) on cartridge could be defective. Take a dry paper towel & wipe the copper contacts on
down the page If you lay the print on the exit tray face up and open the cover. Look on the encoder strip, the clear plastic strip behind the carriage, you should see an ink or grease spot right above
Question about Officejet 5610 All-In-One InkJet Printer
...WORK-NOW ALL INK CARTRIDGES ARE LISTED AS MISSING AFTER COMPLETING THE RESET. There is a coder strip that the print cartridges ride on that strip needs to be replaced , they seem to run between ...
...If it's an inkjet machine, there's a possibility there is some ink or grease on the encoder strip (a small belt-like plastic strip that goes through the print-head carriage). If it only ...
Usually answered in minutes!
2,817 Questions
1,584 Questions
1,223 Questions
991 Questions
857 Questions