Questions & Answers for: straw Cars & Trucks

...timing and how to tell if crankshaft in right place, toyota 1998 sienna find piston #1 and put a straw in the hole rotate the motor till the the straw reaches the highest point thats top dead ...

...markes on the motor to line up the # 1 spark plug wire with the rotor. You can use a drinking straw inserted into the #1 spark plug hole and turn the crankshaft with a socket on a ratchet

...is the best way to find TDC on number cylinder. Pull plug on number #1 cyclinder, and insert a long straw or something of that nature into the plug hole. Use a wrench to turn the crank until the ...

...sat outside for two years bottom won,t open Get a can of WD40 or Liquid Wrench and use the plastic "straw" to spray into the lock mechanism area. You might add an "extension" to the provided straw ...

...bumper and remove the glass covers from the front? Any ideas?? Job done - I got a "bendy" drinking straw the ones that have the bendy bit towards one end. Looped a thread of cotton through this

...problem.  I think it has a crack along it's length.  Image drinking a soda through a straw with a crack in the side of the straw maybe half way down.  As long as the level of the ...

...the resovoir is bad cracked or missing, it would be the same as trying to drink a soda through a straw,but the straw is not inserted below the surface of liquid.or if the straw was cracked, no ...

...roof on my 1998 slk 230 Just bring down the hydraulic level to where it should be. Use a drinking straw, place into reservoir, put your finger over top of straw, lift straw up and out of reservoir ...

... cap is pointing to #1in the firing order. One way to tell if the piston is to the top is to take a straw and put in the spark plug hole and the piston will trap the straw when at the top. Just be ...

turbo 3L 2002 model John, find which is Spark Plug Number 1. Then remove all spark plugs Place long straws down the Spark Plug Housing Turn Crankshaft Watch the straw go up and down while turning Mark