...base unit The remote base works fine...charges hand-set appropriately. However, the wired/land-line base seems to have a short in it or something. It no longer charges the hand-set, and the light ...
Question about Maxus 5.8GHz Handset Cordless Phone
...base unit. Just put each phone in the charging cradle in the base unit for about 10 seconds. The indicator light will blink during the registration. If you are lucky, this may solve the problem. ...
Question about Channel Tens Unit ProM 500 with Ems
...unit and it stop admitting a signal. is there any thing i can do ? Hello hadmcontrol1, I will need information on the error reguarding size, polarity, type of battery you connected including make, ...
...UNIT POWERS UP ..BASE WORKS..BUT I CANT GET SPEAKERS TO WORK..ANY SUGGESTIONS..TY CAN YOU SEPARATE THE SPEAKER FROM THE SYSTEM .IF CAN CHECK IT WITH MULTIMETER OHM SCALE OR USE 1.5V DRY CELL AND ...
base unit BT Studio 3500 The flashing green light is the in use indicator on the base. Click the scroll button down on the handset to show the call list, then press the x or secrecy button, then press
Question about XDVD8181 Car Video Player
...the fuse and unit is getting power. I unplug system plug it back in unit blinks for a second will not turn on but was able to eject DVD that was inside what do you think is the problem stop ...
The original battery stopped working. Whenever we picked up the phone it just made a very loud noise in our ears. Now I ordered replacements batteries from ebatts. The red light is always on, slightly
Set clock on xdm6820 With the unit on, press and hold DISP until the clock beginsto flash, then release. Press TUNE << to adjust the hours and TUNE >> to adjust the minutes. Press DISP ...
Question about XDM-6820 CD Player
I have a dual xdvd110bt car auto head unit after I hook it up the screen flash off and on and the volume cuts in and out and I have two head units and does it on both Possibly a bad ground. Ground ...
Primera Disk Publisher Pro DVD Hi. On some publishers you only have to undo 4 screws and the DVD unit comes out. My unit does not do that. The drives are accesible only if you take off the back plate ...
Usually answered in minutes!
8 Questions