Questions & Answers for: stk392 010

Ad

Question about Televison & Video

2 Answers

...STK392-020 chips. The -010 are the weakest and the original -040 always seem to fail. I have found that the -020 is the most reliable. Here is the spec sheet for stk's chips ...

Ad

Question about HC-P4752W 47" Rear Projection HDTV-Ready Television

1 Answer

...STK392-010 and is an upgrade available? to get longer life? any fuses, or caps that should just be replaced because it is a good idea while I have the board out does not look like fun to do so only ...

Ad

Question about HC-P4752W 47" Rear Projection HDTV-Ready Television

1 Answer

...stk392-010, your saying these numbers convert to stk392-140, stk392-110? just trying to clarify since i will be purchasing chips. oh one more thing when i replace chips does the tv automaticaly reset ...

Question about HC-P4752W 47" Rear Projection HDTV-Ready Television

1 Answer

...STK392- 010 CHIPS ARE THESE INTERCHANGABLE. REGARDS MARK, ALSO IS THERE A PROTECTION RESISTER OR FUSE FOR THOSE CHIPS, REGARDS AGAIN MARK (1) The STK392-110 are the convergence amps, (2) they are not ...

Question about HC-P4752W 47" Rear Projection HDTV-Ready Television

1 Answer

should be STK392-010 through STK392-040 either series are interchangeable and you can get them at the following link as well as the 3.9 ohm 2watt convergence resistors. http://servicemanuals.vstore.ca

Question about HC-P4752W 47" Rear Projection HDTV-Ready Television

1 Answer

...STK392-010 ICs Convergence Issue. Hello All, My Samsung HC-P4752W started having convergence issues yesterday. I now have a blue ghost image. A few questions: Is it worth trying a manual convergence ...

Question about HC-P4752W 47" Rear Projection HDTV-Ready Television

2 Answers

STK392-010 Please can you tell me how many STK392-010 are used in the Samsung model HC-P4752W There are usually two one contains three amplifiers so there are two for the Red two for the Green and two

Question about HC-P4752W 47" Rear Projection HDTV-Ready Television

1 Answer

...STK392-010 IC's do I need to change any other parts when I change the STK392-010 if yes what parts Thanks David [email protected] check the 3.9 ohm resistors as well as some of them may be open ...

Question about HC-P4363W 43 in. TV/DVD Combo

1 Answer

STK392-010? The picture is severely pinched in at the top and bottom, and off by 1-2 inches on each color. I smelled a burning and the thermal paste is cracked. I have been in the convergence menu and

Question about HCM4216W 42" Rear Projection Television

1 Answer

stk392 010 replaced and all resistor ok.but 3color image coming. stk392 010 replced with 3.9om resister and all resistor ok but 3colors 3picture coming .wahat is the probiem? Where did you get your ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76573 Answers

Cindy Wells

Level 3 Expert

6255 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...