Questions & Answers for: Singer stitch tension

Question about 7436 - INGENUITY

1 Answer

...stitch, and it did the same thing. It would be fairly good for a few stitches, and then it would have a bunched up place and have loose threads. Thanks, Vicki M. Could be a tension issue. Try this to ...

Ad

...tension on top but stitch in still the same. Peggy pucker is caused by too loose or, to tight adjustment of: the thread tensioners both the bobbin tensioner and, the needle tensioner need to be ...

Ad

Question about 7462 Mechanical Sewing Machine

1 Answer

tension problems top stitch is irregular it seems slanted the bottom of the material has loops where the stitch should be i have a singer 7462 touch n sew ive made about fourty quilts on it and it's ...

Question about 7462 Mechanical Sewing Machine

1 Answer

...tension on the top stitch looks OK, but no matter what I adjust, the bottom stitch is loopy. Any help here would be great! increase top thread tension slowly till u get similar stitches on both ...

Question about 7462 Mechanical Sewing Machine

1 Answer

type of fabric. Most likely it is the tension. Double check the tension by sewing a wide zig zag stitch and examining the top and under side to see if they look identical and not puckered or too loose

Loose bottom stitches on Singer 1507 The top stitches seem ok, the bottom stitches at very loose. Adjusted the bobbin tension to high, no help. top tension must be adjusted to fix loose stitches of ...

Question about 14SH654 4/3 Thread Stitch Sewing Serger

1 Answer

...them right by using the manual. Please help! if the tension dial don't make the stitch better, then the machine needs to be checked to see if tension dial need adjustment or there is a timing ...

Question about 4423 Sewing Machine

2 Answers

...tension for straight stitch sewing. B. Thread tension too loose for straight stitch sewing. Turn dial to higher number. C. Thread tension too tight for straight stitch sewing. Turn dial to lower ...

My singer model 2263 will sew fine then it skips about 3 or 4 stitches. What causes this needle /hook timing , incorrect needle thread tension or worn bobbin shaft Make sure you are using a brand new ...

...stitch top and bottom. Be sure presser foot (embroidery foot) is fully lowered or tension discs will not fully mate. There should be notable difference in tension with foot up verses foot down as you ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machine Experts

Cindy Wells

Level 3 Expert

6688 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...