tension on stitches top stitch is normal, but bottom stitch is big loops. I have the euro-pro 9120. Have rethreaded and removed and replaced bobbin several times but problem continues. HELP!!! Loose ...
Question about 8260 Mechanical Sewing Machine
tension too tight that's why it is pulling the bottom stitch all the way through it looks good from the bottom but not good on top. Its pulled the stitch all the way through the material. I had my own
...to do that,but there should be a little screw on the side if the bobbin which regulates tension. I would rather try different tensions on the needle and alter stitch length than touch the
Question about 6131 Mechanical Sewing Machine
...stitch? thx for your help This tutorial should help - http://yourfabricplace.blogspot.com/2009/05/how-to-sew-with-elastic-thread-shirring.html I do not change the tension and use a zig-zag
pull through with foot down, with good tension. Stitch should 'lock inside the fabric(use two pieces of fabric and make a seam, thread from both top and bottom should be visible when you open the seam
...at all. I have a janome 659 one step button hole machine I cannot get the tension correct at all..do I thread the machine with pressure foot up or down ?..it keeps missing a stitch to please
...tension when you pull on it, it should stitch --- However not stitching at all can be from having the wrong needle, wrong brand, type, or in incorrectly. Sometimes even the wrong size can prevent ...
...get a straight stitch. What is the little screw on the back of the machine with a + and - sign on the sides. what are the factory settings for tension...stitch size and correct letter for ...
stitches are too tight on Euro-Pro Shark 60 - 384 if the top tension is on 5 put the tension on 4 and see if that helpsbut bring the tension down one number at a time and then check to see if the ...
Question about Shark 60 - 384
...tension, and stitch setting, etc. The only factory standard settings that you need to worry about is the top tension and the bobbin tension. The standard factory top tension is the midway point ...
Usually answered in minutes!
132 Questions
105 Questions
58 Questions
66 Questions
64 Questions