...purchasing the whole lot again. If you purchased this then it should operate with a dongle, if you stil have this that might be proof of purchase enough for a dealer to help you
...the lower part under tha foot ..and it might be locked for embroider...in this case it just stay stil and the movements of the fabric is made by hand..and indeed sometimes has a strange noise ...
...i did but now the upper neddle is not pulling the thread and i got it out again and put it back stil doing same thing can't do anything make sure when you put the bobbin into the case, the thread ...
...I was using an alphabet stitch, heard some clicking and the needle stopped moving. The handwheel stil turns smoothly, and I took off the front part of the case so I could inside, and the handwheel ...
...new needle? Also, check to make sure the thread is 'seated' right between the tension disc, if you stil have a problem then your machine is out of
Question about Sew Precise Mechanical Sewing Machine
I have cleaned the machine. I have tried both solitions in my Jaome machine and still loops are forming on the botom. i have even moved the little screw on the bobbin- tested the thread and changed ...
I need a new spoolhouse for my Husqvarna 5710, it is an old machine, can I get stil get a new one? I am certain that it is possible to get a part for your model at this site. ...
Question about Viking 1
...if thread is entangled and check if needle is bent.I replaced the needle and retread it but stil tell me the same The last time we used it,there was a hard noise then the machine tells ...
Question about 9105 Computerized Sewing Machine
...the hand wheel is stiff and not work but it's foot has a ummmhhh sound which is telling me dat is still good but the wheel is not work or whatever...bt im not an eletronic person so i tried my
Question about 9105 Computerized Sewing Machine
MY empisal expresion 889 is stil new but now that i want to make some pillow cases i find it do not want to feed the material the feeding mecanism below the foot looks like it needed to be set Check ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions