Questions & Answers for: stihl ts400 carburetor Saws

stihl saw TS400 will not get fuel through,NON START stihl saw TS400 will not get fuel through,I have changed carb diaphragm,there is a good spark but will not start. how much fuel can be put into a ...

I bought a rebuild kit for a Stihl TS400 and the piston has an arrow on it is there a reason for the arrow I believe the arrow must be installed facing the exhaust.

stihl ts400 concrete cutoff saw You should go to a Stihl dealer and ask for the belt for a TS 400 Cut Off Saw. The belt is ribbed, you should only put on a Stihl part to replace the belt and make sure

...a new carb kit to my stihl ts400 also new piston,rings,barrel,plug and all filters and still will not run has good spark but also has strong kick back for some reason Are you using new fresh fuel

whats the fuel oil mix of sthil ts400 Stihl two stroke oil mixed ar 50-1, do not use cheap two stroke oil or oil for designed for out board engines.

carb settings for stihl ts 400 does anyone know the carb. settings for the ts 400. Standard settings: screw both in fully, unscrew H screw 1 full turn anticlockwise. unscrew the L screw 3/4 of a turn ...

stihl ts400 starting problem i got consaw stihl ts400 problem, my saw wont start, it starts with every pull but only for one cycle, gave new filters sparkplug, checked compresion and so on and its ...

ts400 doesn't start up, used to start but when it warm up turn off. now it'll nat start at all. Sounds like it is Over heating to fast take to the shop and see if they can find you a part or you can ...

Stihl ts400 quick cut won't draw fuel. New carb installed same problem exists. I am now getting beyond frustrated. It will start and run for a moment on carb cleaner but when its out of carb cleaner i

Stihl quick cut no start This machine will not draw fuel though it has brand new carb. any suggestions? the metering lever is stuck having been stored prior to installation