Questions & Answers for: EliteGroup stick run

...run unstable. Any recommendation without having to replace the processor? Help This may sound counterintuitive but its just a suggestion. I see by your prior post you are using a PC2-4200 1GB ram ...

run High Density RAM stick as yours is possibly. You might need to exchange it for a stick of Low Density RAM. According to some quick research, it says your motherboard can only read up to 2 GB TOTAL

...stick I will have 512 meg(1/2) I can swap to the other slot and again 512meg(1/2) with both sticks.visa-versa...... The brand is "Crucial".com and when I run theyre "cpuid" program it recognizes them ...

...Open computer and reseat memory Sometimes when the computer is moved and/or over time a memory stick can become loose causing the computer to be unable to read the memory or get errors as it's ...

...stick in (512MB) and ran the memory test again. I only let it run for 3 passes and no memory errors where reported. I then removed that stick of memory and put the 2nd stick in. I ran the memory test ...

run system RAM at the speed of the slowest stick. So if you have two sticks, one rated at 800Mhz and one at 666Mhz, then the system RAM speed will be at the lower 666Mhz speed for both sticks. I would

...run in "dual" mode. If you have matching RAM, and you have 4 RAM slots, put one stick of RAM in slot #1, and one in slot #2, and leave #3 and #4 empty. Start it up, to see if it is using "dual" mode. ...

...now monitor has no display. I Installed RAM and now monitor has no display. I recently installed a stick of 1 GB ram on my computer. I have an EliteGroup 865G-M motherboard ...

...stick of RAM. So, your RAM seems to run at "double-speed". So, when you buy more RAM, either try very hard to "match" your current 1GB stick of RAM, or purchase a "2GB dual-channel kit", or two "2GB ...

...stick and a 2gbs but only reads 2.5gbs with my two 2gbs ddr2. plz help Hi, here you can download a manual for your mainboard: ...