Questions & Answers for: stereo balance

terratec phase 22 problems with getting stereo sound my terratec phase22 soundcard seems to have only mono output, not stereo, or I don`t know how to enable it. can someone help, step by step ...

Ad

Question about CDE-9845 CD Player

1 Answer

...stereo i Cannot figure out how to access the Fader not the balance,altho i havent seen that function either. ive been to the alpine site and they dont even mention it. im sure its gonna be something ...

Ad

Question about CDE-9845 CD Player

1 Answer

...can be done with tuning the stereo and the amplifier gain. balance so you dont feel too far from a speaker, most people get more speakers, or run a 4 channel amp to their speakers to make them

Question about AVR-3200 Receiver

1 Answer

...stereo, not surround sound for dvds or anything) and 2) there seems to be nothing coming out of the left channels at all; is there a way to change the balance? There doesn't seem to be a knob for ...

Question about HK695 Computer Speakers

1 Answer

...and see the output settings and output balance. The balance should be set to 50/50 so both left and right channels get the standard volume level, and that the output is set to standard stereo

Question about Xenyx 2222fx Premium 22 Input 2/2 Bus Mixer

1 Answer

... What interface are you using... not the line input on the PC I hope as it is NOT balanced... it is Stereo input with UNBALANCED input. If you tie the mixer using a balanced to 1/8 inch balanced ...

...balance on the stereo. Hi there:HERE can find the Owners Manual.Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some ...

...balance controls on the stereo to allow only one speaker output, touch that speaker's output wires to your vehicle's speaker wires until you figure out which pair of wires powers the speaker ...

...balance on my car stereo supposed to work after a new stereo amp has been installed ? Subaru car radio. if everything was correctly installed then yes, but depending on what was used, the installer ...

stereo, any channel balance/volume controls appropriately adjusted and most importantly the source material must be stereo - in the case of taped material it must have been recorded in stereo in order

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Computers & Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...