Questions & Answers for: Wurlitzer step board

board is bad? Where can I order parts to fix it? look for any damage of your dics, maybe some of your dics are scratched or has a dirty part. hope I helped you.^.^ reply me if still it has the problem

rowe jukebox The carousel spins when selection is made but the arm won't pick up the record.This is model # R-89 and serial #1039944. Any help to get this up and running again would greatly be ...

Have a Rowe Ami mmcd-1 jukebox but having keypad problems The numbers 2 and 6 on the keypad are not being read. Sometimes if I reset the CCC (Central Control Computer) the 2 and 6 will work but only ...

My cd rowe ami jukebox is stuck in scan/transfer mode As soon as I turn on my jukebox, transfer starts and runs continuously going to every ninth cd. It picks up one, transfers it, puts back into ...

Hi! my OMT CD Wurlitzer is in need of a new printed circut board, is has the phillips CD Player unit CDM12 ABOVE IT. Type;CDF 91 0055647 Model: OMT CD -100 nz NR 41018750 V 100-240 any help with ...

wurlitzer omt K99 the cd will stop during play wurlitzer omt K99 the cd will stop during play and sometimes will return back to base I seem to be having the same problem and all signs point to the ...

CD player not working I bought my OMT not working and have managed to get most of the functions going. The CD player has never spun (I have replaced the CDM12 with a CD pro II). The SC board sometimes

Step 2 - Make sure that the Opto board's LED is flashing while the mech is scanning. If not then you have a problem there. The opto board may need adjusted or cleaned. Make sure there is not a ball of

Step by step instructions on how to put a turntable belt on a wurlitzer 2300s jukebox. Pictures would be helpful too. The service book does not show this step. Dale Utube,......

Wurlitzer 3300 Americana 3 Jukebox. Why do only some speakers work? the two bass speakers inside are working, but only one of the four smaller speakers (high level) is working. Any ideas please? Start