Questions & Answers for: Honda step 2

...a 00 four door civic lx need torques specs to put the 10 bolts back in DOHC... 1st step =22 ft. lbs. 2nd step 61 SOHC... 1st step = 15 Step 2 = 36 #3 =49 fourth step only on bolts 1 and 2 = 49 ft. ...

Ad

step 1. 1. Unplug the garage door opener motor from the electrical outlet. 2. Hold the end of the garage door opener remote 2 to 5 inches from HomeLink. Make sure you are not blocking your view of the

Ad

Question about 2001 Odyssey

1 Answer

Step 2: Remove the Plastic Ignition Coil Wire Cover by turning the 2 Screw hooks counter-clock wise and lift it off. Step 3: Unplug all Spark plug wires and remove each bolt for the ignition coils and

Question about 1998 Accord

2 Answers

STEP 2) Check the oil level, and refill is necessary STEP 3) Start the engine, put the car in park if you have an auto, neutral if you have a 5-speed. Hold the RPM's at 3000 RPM until the radiator fan

...Step 2: Tighten each bolt to 36 ft. lbs. (49 Nm).Step 3: Tighten each bolt to 49 ft. lbs. (67 Nm).Step 4: Retighten only the 2 center bolts to 49 ft. lbs. (67 Nm). Step 1: Tighten each bolt to 14 ft. ...

...is not a 1.4L listed in the 1995 civic dx there is a 1.5L and a 1.6L 1.5L D15B7 & D15B8 engines step 1 22lbs step 2 43lbs D15Z1 engine step 1 22lbs step 2 53lbs 1.6L VTEC step 1 22lbs step 2 ...

Question about 1998 Civic

1 Answer

...*************** Step 1: torque bolts in sequence to 14 Ft/Lbs Step 2: torque bolts in sequence to 36 Ft/Lbs Step 3: torque bolts in sequence to 49 Ft/Lbs Step 4: retorque bolts (1) and (2) to 49 ...

...Step 2 grab all the wires in the back of unit. Step 3 cut as close as you can to unit removing wires Step 4 recycle wire in the attempt to recoupe some of your wasted money. Step 5 firmly grasp 32oz ...

Question about 2002 Odyssey

1 Answer

...the way>? 3: remove wires to starter solenoid. 4: unbolt starter, it fall off to hands. only step 2 varies by car type. if you want the exact way, alldata.com has it. login and look. step by

Question about 1998 Civic

1 Answer

...1.6 liter engine Torquing the head bolts is done in 4 steps. step 1 14 ft/lbs step 2 36 ft/lbs step 3 49 ft/lbs step 4 retourque bolts 1 and 2 at 49ft/lbs. Use this diagram for the torque

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

1992 Honda Accord
1992 Honda Accord

2,998 Questions

1991 Honda Accord
1991 Honda Accord

2,681 Questions

1995 Honda Accord
1995 Honda Accord

1,631 Questions

1996 Honda Accord
1996 Honda Accord

1,636 Questions

1998 Honda Accord
1998 Honda Accord

1,570 Questions

Top Honda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...