Questions & Answers for: stem

Ad

broken stem off aromen gobletover 50yrs old maker bleirristall made in bavaria.germany 24% clear stem any chance of repair have broken pieces was my Mothers passed away meens the world to me please ...

Ad

Question about Computers & Internet

1 Answer

stem on lcd monitor can't be removed I removed the base from the stem of my ViewSonic VX2235wm and wall-mounted it. However, the stem on lcd monitor has no no visible method of removal and the ...

Ad

Question about 26 In Ladies Bay Pointe Bike

1 Answer

how do I tighten the stem bolt on the handlebar stem? If you just need to raise the height of the stem, all you need to do is loosen the hex nut at the top of the handlebar stem with a box wrench or ...

Question about 26 In Ladies Bay Pointe Bike

1 Answer

I would like to raise the handlebars. I have loosened the stem wedge nut and the handle bars will not budge. I've tried everything almost to the point of losing the ball bearings in the steering shaft

Question about 26 In Ladies Bay Pointe Bike

1 Answer

how to free a seized stem If you have the type of stem that inserts into the fork (through the steerer tube), there are a couple of tricks. 1) Make sure the stem bolt is loose. but not completely free

Question about Full Suspension Mountain Bike

1 Answer

...bicycle From looking at photos; it appears as though that bike uses what is called a "quill" type stem. This makes it much easier to accomplish your goal.When you look at your bike - the part that ...

Question about Full Suspension Mountain Bike

2 Answers

raising handlebars on schwinn ditch 2.0 dn The handlebar itself is held in the stem with one bolt sort of on the underside, if you want to pivot handlebar up. The handlebar stem that goes into the ...

Replaced a gerber diverted stem. Water pours out of it. I also replaced the stem valves for the hit and cold. There should have been a friction ring made of either nylon or fiber that goes on the ...

Where do you look for release of. The Stem if there is no small screw There is a couple of different methods to release the stem, 1. By a screw, note if a screw only 1.5 turns only 2. push button near

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Watches Experts

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

842 Answers

Bruce Robin

Level 2 Expert

300 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Watches Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...