Questions & Answers for: Dodge Dakota steering pump seized

Steering pump pulley Does anyone know how to change a power steering pump pulley on a 2004 for Dodge Dakota 3.7 V6 You'll need a power steering pump puller available at most part stores. They are very

...WHILE YOU HAVE 1 HAND ON COIL SPRING..YOU SHOULD FEEL ROUGHNESS IN COIL SPRING ON SIDE WITH BAD BEARING..THESE BEARINGS CAN BE HARD TO REPLACE..USUALLY SEIZED INTO STEERING KNUCKLE..I HOPE THIS ...

...steering pump. The sounds are made when there is low fluid in the pump/system. Cheapest check is to make sure that the feed and return lines at the pinion housing are firmly attached. You could also ...

...steering...pump still full and seems to b fine...can still use 4wd... ball joints replaced year ago... Seems to me like it may be the steering rack assembly! I had to replace mine a few months ago, ...

...steering pump replaced. I tried changing the belt and the tensioner, but still squeals. Is it possible the pulley on the power steering pump was reattached incorrectly? It looks fine and I see no ...

2001 dodge dakota 4.7 QC getting hard to steer If not low on power steering fluid you could possibly have a ball joint or tie rod trying ti seize up.

...pump and rack truck also wants to pull thru the turn also tie rod ends have been changed had this problem ended up being steering column universal joints were seizing,had them replaced .....solved ...

steering pump line and see if it is pumping flouid out .when turning wheels, If not this is your problem. goo luck. Try a new belt. When belt is cold it's tight as it gets warm I suspect it's slipping

...steering pump just replaced the power steering pump and now when I start it up the check gauges light comes on and stays on. the oil pressure gauge is reading no pressure. Plenty of oil and the ...

power steering pulley removal tool I need to replace the pulley on a 2005 Dodge Dakota. Pulleys are not replaced on a power steering pump You get a reman pump