Questions & Answers for: steering knob

fix lights in steering wheel - 04 DeVille some of the lights for the controls on the steering wheel are out. Do I pop the knobs off to access the bulbs, or is there another way to access them? 2004 ...

I have a 25hp evanrude (1994)tiller steer,would like to ask if the knob at the end of the tiller is for the slow running mixture,if so how is it ajusted as my motor runs ok at speed but mucks up at ...

steering knob on the wheelchair steering knob came loose and is about to come out. The steering knob on the motor wheelchair came loose and it's about to come off. Don't use superglue! If the boot ...

steering wheel but not the knob. Is this normal? Can it be fixed? dear friend-the volume on the steering works from the back of the radio and the knob from the front,they work seperate but both can be

...steering damper. This is a knob that when tightened, put a bit of resistance on the steering fork. You don't see them much these days but back in the day, when riding at high speed, sometimes the ...

...knob switch on a motorcycle? If it located above the steering neck on the handle bars in the center , it is just a steering damper. It slows down the twisting of the handle bars if you hit a pothole ...

i need to change the hi beam low beam switch and i can not remove the tilt steering knob... THOSE KNOBS CAN BE A PAIN. I THINK YOU NEED TO WIGGLE PULL & TWIST & **** IT SHOULD COME OUT

...knob just so I knew it was turning but nothing. Can this be the heater motor resistor? If so, where is it located and how do I access it to replace it? It is a Buick Rendevous 2003. the blower ...

...wipers work? The turn signals, wipers, and head lamps are controlled by multi function knobs on the steering column. Due to constant use their internal metal contacts can wear and corrode, preventing ...

...knob came loose inside steering wheel, can i go in through were the horn is to get to where that knob connects and fix it WITHOUT MESSING ANYTHING UP LIKE THE STEERING OF THE CAR? Depending on the ...