Questions & Answers for: stb button remotes

STB. To get my Panasonic TV/VCR combo (PVQ-2510A) to work with the Comcast remote I had to do the following: 1) Do the remote code search in AUX mode (or VCR or DVD mode if your remote has that button

...STB while you're doing this - Press the UPC button. The UPC button will illuminate once. - Press RED and OK together until the UPC button flashes twice - Enter code: 993 (after the last digit the UPC ...

...STB button on the remote, with a msg saying, STB on the screen. I have to change everything on the tv itself. Take the batteries out of your remote and let it sit for a few minutes. In plug your TV ...

mogen STB 2014 digibox hi, anyone know if or where i can buy a new remote for this model, mogen STB 2014 digibox joe. ebay sell them. about £10 inc postage.

...with a Sony Trinitron KV-32FS320 32" TV. I reset the remote to factory default. Press and hold STBWhile holding STB, press OKRelease both keys, wait for device keys to blink twicePress 9-0-0.

...STB 262 set top box.Need to scan for lates channels. Menu button not working. AWA HD Digital Terrestrial Receiver Model STB 262 These STB262 box remotes won't work if they are not hooked up with the ...

...button for Cable. Holding down the Cable buton I programmed in the Motorola VCR code 0050 and now my Hannspree remote controls the Comcast STB. Now I use the TV remote to control both Comcast Ste Top ...

...STB button you put in the code 000. By doing this you have reset the remote control. Also a good trick is to remove the batteries and put them back in. With that you are basically turning the remote ...

...button marked ENTER or OPTIONS Remote should now work with tv. To control volume and power at the same time... Press and hold STB and OK at the same time, let go, red blinking up top enter the code ...

...STB with universal remote are: 0576 0612 0639 Direct Code EntryPress and hold the SETUP button until the red indicator stays on, then release the SETUP button. Press and release the desired Mode ...