Question about MultiSync VT45 Multimedia Projector
...red status light on NEC VT45 projector There is a flashing red light on our school's VT45 projector. The lamp has been replaced but the flashing red light remains. Any suggestions to try? make sure ...
Status indicator blinks RED, not starting. On power-on, the usual start-up delay, the the Status indicator blinks RED, and the Power indicator stays ORANGE; and Projector does not start! There are ...
status' light is continually red and the 'power' light is orange. The problem is that I cannot turn on the projector to reset the status of the lamp - or do anything else. It simply does not shoot any
Question about (MTLAMP820/1020) Projector Lamp for MT820, 102
red 6 times in the status, then power light then goes constant orange and we here three beeps, will you please help me with the problem. Hi there I'm shocked that NEC can't answer this guys. The NEC's
...status lite on red power on orange whats up with it Hello. First check the lamp! From your description, it sounds like the projector is telling you that the lamp needs to be replaced. In "eco mode", ...
...red blinking light. I changed the lamp but it has not changed the status. I had this same problem with 2 NEC VT595 projectors. My problem was that there was a broken "tab" on the lamp cover (the ...
status lamp blinking orange 6 times PROJECTOR. NEC VT491 THE STATUS LIGHT IS BLINKING 6 TIMES RED, AND THE POWER LIGHT IS ORANGE
Question about VT676 Multimedia Projector
Status light blinks red bulb replaced only 2 months ago Status light blinks red bulb replaced only two months ago? when i turn the power off and on the status light goes green for about 30 secs then ...
...red status lights) mean the lamp needs to be replaced? or could something else be wrong. According to NEC technical support, if the status light flashes red six times, this could indicate a defective ...
Question about NP400 Projector
NEC NP-M300W projector: Lamp status RED, replaced lamp still RED. Status indicator GREEN. Won't power on. On the remote control of the projector, press and hold the HELP button for 10 seconds.
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions