Questions & Answers for: status mitsubishi tv lights stays

Status light stays on I have a 57inch Mitsubishi dlp. I turn the tv on and it is making a squeaking noise as if the lamp wants to come on. I wait a minute and the tv shuts down and the red status ...

status light stays red no tv no power light turn tv on blue lights soild for a short time then it goes out a soild red statis lihgt stays on. same thing have reset at least ten times and cut the power

...status stays on, no screen....unplug for one minute then tv comes back on.....this has happened a few times...what is up? If the red light is the lamp light then the projector lamp is defective. ...

...status by unplugging the TV power. TV turns on again but then I get the same thing, TV turns off flashing red status light 3 times and one long red. Once the status light blinks 3 times, this is an ...

...Mitsubishi WD-52327. The TV turns on and stays on for 30 sec to 3 minutes. Then the TV shuts off, no picture, no audio and status indicator flashes red 3 short times and then one long red flash and ...

heard a loud pop in the tv, and then it shut itself off and had a red light. turned it back on and the status light blinks green then stays green no picture but sound. you need a new lamp

Tv on (Model WD-60735) and I get sound but no picture. Then after a few seconds it turns itself off and the STATUS light stays a solid Red. I have unplugged and Have you check and or replaced the lamp

status light blinking red light stay on even when tv went black and it has sound

...Mitsubishi DLP Projection TV Status light comes on shortly after turn on and stays solid red Using error code test I get 4 or 44 from the blinks. Can not find any detail of what that error code is ...

Mitsubishi 65inch DLP tv ive replaced the lamp twice ,black screen i can hear it power on and fan running status light stays red and lamp blinks green to no end,black screen and no sound ?? This might