Questions & Answers for: Lexmark status light

...until lights flash up and down, press reset again, close door. Press continue button to print the status of the photoconductor kit, it should be ok. But if you don't change the photoconductor kit,

light comes on. Appears to be some kind of mechanical problem related to feeding the paper into the transport mechanism, or perhaps an issue with sensing mechanisms determining operation status. I had

...light is blinking Just replaced toner cartridge two weeks and I don't have the manual to troubleshoot Here is the manual; led status diagosing starts on page 13: ...

...status wizard always says missing or defective cartridge, even though I tried to remove and replace it several times, as well as unplug the printer. The light on the printer is on green. Thank you ...

...status, press the Continue button once. The Ready light will begin flashing and one or two pages will print out. Look for a section labeled Cartridge Information and locate the word Photoconductor ...

...status light I have been given a second hand lexmark e260dn (which looks brand new and driver CD has never been opened but have no manual). The status light is continously blinking. What does this ...

light and button). Lights indicate the status of the printer. Buttons are usedto continue or cancel the current print job. The lights are represented byReady/Data light, Toner Low/Replace PC Kit light

...paper. Can you describe the status lights of the printer? The light sequence will indicate specific error and status of the printer. For further assistance, please contact Lexmark Technical

...on and check the status lights, error light stop blinking then try connecting the printer back to the computer and try printing again. For further assitance, please contact Lexmark Technical ...