Questions & Answers for: NEC status light

Status light is flashing Hello, I have a lt35 projector, the status light is flashing and according to the manual this indicates a temp problem. I have left the unit in stanby and then switched off at

...light / status indicator blinking red When I switch on the projector, the status light first blinks green a few times, then a beep beep beep is heard and the status indicator starts blinking red, 5 ...

...status light flashing red on WT610 NEC if the status light is flashing .5 seconds on and 2.5 seconds off - you need to replace the lamp cover correctly. if the status light is flashing .5 seconds on ...

...status light This project has a flashing red status light and no lamp The projector will turn on and the start up process is normal until the light should turn on. Then status light which started out ...

...Status light error MT 1050 Pressiing start, green light comes on, Lamp lights, Lamp goes out and Red Status light blinks 2 short and 1 long. I have the same issue with mine. Did you ever find a ...

Status light blinks red bulb replaced only 2 months ago Status light blinks red bulb replaced only two months ago? when i turn the power off and on the status light goes green for about 30 secs then ...

...green then it goes to a flashing orange light there should be a status for the lamp light; check to see if this one turns red. If it does count the consecutive blinks if it is 6 then replace the ...

Status light blinking Status light to repeat blinking 2 times 0.5 second of intervall and off 2.5 second of interval Sometimes the fan overheats. Pull the power plug out of the back for about 15 - 20 ...

...status light becomes green. The lamp light stays off though (no red, no orange, no green). At this point the fans haven't turned on and the lamp isn't on. Then the status light just ...

...status light yellow The power light is on yellow and when i push the power button the status light goes on and when i take my finger out the stutas light turn off it seems the lamp is failing ,the ...