Questions & Answers for: status lamp light flashing mitsubishi

Question about WD-62528 62 in. LCD Television

1 Answer

...lamp light goes out but the status light remains flashing. I have already replaced the expensive lamp in it to no resolve. You guys have any ideas? A friend of mine says that you guys are the ...

Ad

Question about WD62527 62 in. LCD HDTV

1 Answer

...does it say anything about a slow blinking green lamp indicator, much less both the lamp and status indicators blinking at the same time (green and yellow). What can I do? Lamp is bad need new ...

Ad

Question about WD-52327 52" Rear Projection HDTV-Ready Television

1 Answer

Solid yellow lamp light AND flashing yellow status light TV won't turn on and has both a solid yellow lamp light and a flashing yellow status light. Diagnosis anyone? start with the lamp.

Question about WD-52327 52" Rear Projection HDTV-Ready Television

1 Answer

...status light blinks 3 times, this is an indication that there's a problem with the lamp. The lamp may need a replacement. If you replace the lamp, but get the same problem, check the inverter board. ...

Question about WD-52327 52" Rear Projection HDTV-Ready Television

2 Answers

...status light 3 times and one long red. Replace the Lamp P/N 915PO20010 if it has never been replaced. Mats Electronics has them for $99.00 1-800-628-1118 Once the status light blinks 3 times, this is ...

...and the LAMP light starts flashing, in a few min, the LAMP light go's off and the TV go's off, leaving the Orange STATUS light on HELP! :o( When was the Lamp last replaced,the lamp require

Question about WD-73827 73" HDTV DLP TV

1 Answer

...status light keep flashing can anyone help Hi, if your tv is between 1-4 yrs old and havent replaced the lamp it might be time to do so.Mitsubishis uses Osram lamps to light up the screen and tend to ...

Question about WD-62525 62" Rear Projection HDTV

1 Answer

...lamp light not status should blink-I have suggestions but want you to try the self check first--if set has been unplugged plug it up and turn on and when it fails: Mitsubishi ...

...status light ? changed lamp plugged tv back in and yellow status light blinking no power ? Mitsubishi TV troubleshooting Here's something that might also be useful. After you turn on the set, and ...

Question about WD-62525 62" Rear Projection HDTV

1 Answer

status light solid TV powers up, shows me a picture for about 30 seconds. Then cuts off and status lights stays lit with lamp light flashing. What could be the problem? Remove lamp door and check lamp

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...