Questions & Answers for: status indicator lights nec projector

Question about VT37 Multimedia Projector

1 Answer

Status indicator blinks RED, not starting. On power-on, the usual start-up delay, the the Status indicator blinks RED, and the Power indicator stays ORANGE; and Projector does not start! There are ...

Ad

Question about LT35 Multimedia Projector

1 Answer

...projector, the status light is flashing and according to the manual this indicates a temp problem. I have left the unit in stanby and then switched off at the mains, the switched on and still the ...

Ad

Question about VT470 Multimedia Projector

1 Answer

status indicator blinking red When I switch on the projector, the status light first blinks green a few times, then a beep beep beep is heard and the status indicator starts blinking red, 5 cycle: the

Question about VT676 Multimedia Projector

2 Answers

NEC VT676 lamp error When I try to turn the projector on, the status light blinks 6 times indicating what the manual calls a lamp error. The manual simply says to try again. That did not work. I ...

Question about MT850, MT1050, MT1055, MT1056 Replacement Projector Lamp - MT50LP Projector Lamp

1 Answer

...lights are indicating a Lamp Error. There was no warning of the bulb going and i've secured all the covers. Any ideas? Cheers, Rich. Does the status light stay on red? If it does then the lamp timer ...

...status. I had this same problem with 2 NEC VT595 projectors. My problem was that there was a broken "tab" on the lamp cover (the plastic cover that slides in place over the lamp) that is supposed to ...

Question about VT700 Projector

1 Answer

...NEC VT700 projector. I replaced the bulb and housing because it would no longer turn on and the status light would blink every 2.5 seconds indicating the housing on the lamp had an issue. I checked ...

Question about VT800 LCD Projector

1 Answer

...status indicator light will flash 6 times. The bulb will not come on. After this the orange indicator light will come on. There is also an indicator light for the bulb, but it never comes on. This is ...

Question about NP2150 Projector

1 Answer

Status Indicator light red blinking 6 times. It is not the Lamp because the Projector is new. unfortunately even if it's a new projector, the lamp can go bad. since you stated that it's new, i

Question about NP400 Projector

1 Answer

status lights) mean the lamp needs to be replaced? or could something else be wrong. According to NEC technical support, if the status light flashes red six times, this could indicate a defective lamp

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...