Ixus 50 / SD400 hangs on startup My Ixus has orked fine for a long time and but now it hangs during startup. What happens is that the Startup picture is displayed, the lens comes out and then it just ...
LOST STARTUP DISC HAVE LOST STARTUP DISK AND NEED TO ADD OLD PRINTER TO NEW COMPUTER. HAVE LOST STARTUP DISK AND NEED TO ADD OLD PRINTER TO NEW COMPUTER Here is a link for driver and software. Just ...
Question about CanoScan FB630U Flatbed Scanner
...Try this steps before scanning 1. Start -> Click Run 2. Enter msconfig and click ok 3. Click Startup tab 4. Uncheck program that you don't want to startup You can disable programs that you ...
Question about CanoScan LiDE 70 Flatbed Scanner
...to debug--what will that involve? 1. Start -> Click Run 2. Enter msconfig and click ok 3. Click Startup tab 4. Uncheck program that you don't want to startup You can disable programs that you ...
...get a toolbox on my canon scanner 1. Start -> Click Run 2. Enter msconfig and click ok 3. Click Startup tab 4. Uncheck program that you don't want to startup You can disable programs that you ...
Question about CanoScan D1250U2F Flatbed Scanner
...Before you install try this. 1. Start -> Click Run 2. Enter msconfig and click ok 3. Click Startup tab 4. Uncheck program that you don't want to startup You can disable programs that you ...
eror e-00000-0000 hi the solution is : E000 0000 : Description: Startup error The temperature detected by the mainor sub thermistor does not rise to the specified value during startup control. ...
...password, or click Continue.3. The System Configuration Utility will appear.4. Make a note of which startup selection your computer is set on. If your startup selection is set to Normal, switch it to ...
Question about CANNON IR 3530 COPIER FOR 220 VOLTS ONLY
...to solve error code E000000 - 0001 The temperature of the fixing assembly is abnormally high. While startup control is under way, the reading of the main thermistor is less than 30 deg C continuously ...
Question about CANNON IR 3530 COPIER FOR 220 VOLTS ONLY
...Free! Code: E000-0001 Description: The temperature of the fixing assembly is abnormally high. While startup control is under way, the reading of the main thermistor is less than 30 deg C continuously ...
Usually answered in minutes!
1,383 Questions
944 Questions
808 Questions
687 Questions
597 Questions