Questions & Answers for: starter cord stuck

...Jon Pull starter rope wheel is Jamming against casing usually some lube n check for ware will fix it Pull cord is completely hard to pull. Pressure washer stopped running and the pull cord is

...starter cord will seem stuck. In addition, the throttle on the handgrip need to be fully depressed for the starter cord to work. Last, some mowers have a saftey which lock the starter if the wheels ...

...starter cord? You have to disassemble the unit to that point and then get the old cord out. Then you have to pre -load tension on the spring for the recoil unit by winding it (the plastic pulley) and ...

...cord stuck remove the starter assembly and see if it is the recoil or engine. if by removing the recoil it recoils the cord then it is most likely a seized engine but pull the rope a few times with ...

Starter cord on lawnmower will not pull out The starter cord on my lawnmower will not pull out. It seems like it is stuck. I am pulling back on the blade control like I'm supposed to. Hi Mary.

...pull cord tension no tension when i pull the pull cord. The little fingers on the Starter mechanism may be stuck and not expanding. The Starter mechanism my need to be taken off, cleaned and ...

starter out. Just take the cover bolts for the pull cord off. Then see if it works. There are usually two cogs that engage into the shaft of the engine. These cogs push outward when you pull the cord,

it gets stuck. I disassembled it and everything looks fine. What do I do? When you say power cord is the unit electrical? Or do you mean the unit is gas powered and the recoil starter cord gets stuck

area and it was not stuck. I did not let the cord fling after I pulled the cord to start the machine. If the recoil starter was pulling free after you took it off, Are you sure the engine isn't seized

...starter but when I try the pull cord coil it is stuck and will not start battery is dead pull cord is stuck stuck.... what does this mean? you cannot pull it OR you pulled it and it did not retract? ...