...cover move the scanner slegde backwards to start position assemble the scanner power on etc. then the same procedure as every .... i.e. reinstall your hp scanning software hope you hare ...
Scanner start up error 2. Replace scanner cable to the D.C. controller and back to scanner. Or replace scanner cable from engine board to scanner ***'y. 3. Replace scanner ***'y. 4. Replace the engine
...start my hp scanjet 7710 scanner, all LEDs on the front are continuously glowing. Pl help me out. remove to top cover where the glass is, at the buttom thers a start point, that usualy gets dust on ...
Question about CanoScan LiDE 90 Flatbed Scanner
...stops partway along path, motor whines scanner stops partway along path and then motor whines. starts to go back to starting position then stops and motor whines, then goes back to starting ...
...start the scanner and get the image of whatever is on the scanner. Look where the scanner programs are at(usually this is a folder on the start menu). Also, there may be a scan button on the scanner ...
...start the scanner software (either by the buttons or from the scanner). You may want to reboot the computer (in case the computer thinks one program has locked access to the scanner). I hope this ...
Question about ScanJet 2400 Flatbed Scanner
...on the light is glowing but the scanner does not make a move and is not scanning. i have a problem in my hp scanner g2410 scaning start and the meassage displayd start the activex controll on this ...
...Start Here sheet for instructions. Make sure your Windows system is set up for scanner events as follows. Windows Vista: Click > Control Panel > Hardware and Sound > Scanners and Cameras, or ...
Question about ScanPremio 1220ST Flatbed Scanner
...scanner start windows, go to device manager, turn the scanner on and as it goes through its setup, right mouse click and select "scan for new devices" Windows 7 will now see the scanner right away. ...
Question about ScanPremio 1220ST Flatbed Scanner
Scanner start up error 2. Replace scanner cable to the D.C. controller and back to scanner. Or replace scanner cable from engine board to scanner ***'y. 3. Replace scanner ***'y. 4. Replace the engine
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions