Question about AV-27D302 27" TV
...light comes on. I tryed unplugging it, all the buttons on the remote, nothign seems to work. If you dont hear a click theres a problem in the standby power supply. if you do hear a click theres a ...
...standby with a red light on. The side buttons do not work, and I lost the remote a while ago and am having to use a universal which doesn't have all the usual functions. Is is likely to be some type ...
...standby light on the front was flashing. I opened up the tv and found the clicking noise to be coming from a relay directly next to a transformer (not the HV transformer). When I was originally ...
light is flashing tv will not turn on at all Hello, I am a tv tech. I worked on a JVC AV-32D502 today. Problem: led flashes / no power or picture at all. Same as trobertson52's set. The microprocessor
...standby light flickers, its as if someone with a remote control is pressing buttons! The problem started when I moved the TV into a different room, it was not damaged in any way through moving. The ...
Question about AV-36950 TV
...standby light started continuously blinking. I unplugged the TV and let it sit a few hours, then tried plugging it back in and it worked fine. This continued for a few days until eventually it would ...
Question about LT-32X575 32 in. HD-Ready LCD Television
...light....then turns to standby then back on then off again. Can this be repaired? Good day..That problem is usually cause of bad capacitors on the power supply section..As you stated your TV works ...
...light. no response Its not making it out of standby, you could if can safely get it apart (ask if in doubt) inspect the power supply board for damage or puffed up filter caps, then consider having a ...
standby/power light blinks at one time switch ON? Count it carefully. These blinks are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get
...standby light goes on but when I autoprogram the remote I can not get it to power off, let alone change channels and volume. I bought a replacement board, same part size, shape and part # but it was ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions