Questions & Answers for: Sanyo standby light

goes to standby when switcged on fan starts green ready light is on and lamp light dims, but after about 20 seconds goes back to standby. plc xu41 may be check you vga cable (all pin also )

...the standby power is light on,when i turn on again the secondary power it will not work but the stanby power is always on.can i repair that,in what part i trouble shoot the unit? Look for the ...

wont go off of standby green power light keeps blinking , itwont go off of standby Try unplugging the unit for a couple of minutes and see if that works.

standby light and when you poer the tv up the standby light goes off but nothing esle happens Favourite is the 1000uf/16Volt electrolytic capacitor (C806) in the middle of the PSU board. If the top of

...its internal circuit testing. Usually if a problem is found, there will be indications with the standby lights and lamp/temp lights. Are there any other indications here or just the unit going ...

...light at the bottom right hand corner turns on but there is no sound and picture. Sanyo won't help, what can I do? I see so many here with no sound/no picture issues: ISSUES: 1. IF sound main ...

...light will flash again, this is just repeatedly all it does, have any ideas please Power supply in set has a standby the runs 7/24 (all sets do and computers also) and the loss of power  when ...

...standby light not working nothing tried as it works but no standby light anymore Do you mean that the standby LED does not light up; but the set works fine? Of so, either the standby LED is damaged, ...

...standby light on a sanyo tv My tv recently started turning itself off after I turn it on. This goes into a cycle of 3 on and offs. Then I have to turn off the power source completely then start over. ...

...standby light so i replaced the power control board now it is still not getting any power or standby light well that was a waste of money probably why we recommend that you get a professional ...