Questions & Answers for: E-Machines standby button

...not set to standby or hibernate. This works if you are running Windows XP or Windows 2000. Hope this helps! You can try holding the power button in for 10 seconds or more until the computer shuts

...power options is the power button set to turn off the system or go into standby .... if is is set to standby change it to power down... also did you update the Intel 845G Chipset Driver from

...button used to flash, which I imagine indicates standby mode. Is that correct? Now it does not flash. If it saves electricity in standby mode, how can I get my eMachine back in standby mode? Thanks! ...

...button, it apparently goes into standby?, because the power light goes into a stutter mode, very fast blink. How can I get it to shut down. Check the BIOS to see if ACPI is enabled. Might try looking ...

e-machine 3230 xp operating system no standby button on shut down You should install Windows XP "SERVICE PACK 3" in your system.

...standby power to the motherboard. Power button may be broken, does it 'click'? With the case open, do any of the fans start, then stop? If yes to the above, you may have a bad power supply. Can you ...

...button for 6 seconds it will turn off..................sounds as if someone has set the power options to standby or sleep instead of shutdown......if using xp right click on a blank space on the ...

...button pushed against the metal rod, which in turn pressed against a power switch located inside the Power Supply. The design after that, was a power switch located in the Front Panel. (Plastic front ...

...button labled Power under the screensaver tab. Check the power standby settings and set them according to your preferences. Hopefully these will correct the problem. If so, please don't forget to ...

button to operate in Standby/Resume mode or Hibernate mode. The power indicator lights when the computer is turned on." why not test the PC with newer monitor 2011 newer LED back lighted monitor to be