Questions & Answers for: stand fan instruction manual

...manual for your fan, with the assumption that there would be assembly instructions, but was unable to find one. Do you still have the owner's manual? And if so, are there any assembly instructions in ...

Manual to remove the drawer, and dried it out with a fan and it worked. I would still like to obtain the Service Manual if possible, since I have experience repairing household appliances and 26 years

...stand fan model #BSF1731RC - can't remove fan blade covers to clean. Can't find user manual with care/cleaning instructions. put motor oil to the midst of your fan blade may there are lots of rust ...

...stand by, then after several off and ons it eventually comes on ok, it seems to be getting worse Maybe the cooling fan it's not working, getting all the electronics overheated, protecting, make sure ...

...fan, is very simple to assemble for basic home use. Pole and Base The first step is to lay the parts on a floor. Then assemble the pole on the base of the stand. This is very simple, because the ...

...instruction on manual book. After switching the indoor unit to cool, the indoor fan starts and the light flashes, lower the temperature setting to 16 degree centigrade. When the light stops flashing ...

stand up fan and I need to know how to get it to quit rotating. Not sure what you mean by "stop rotating" I assume you mean to stop oscillating. There should be a knob on top of the motor housing that

fan. For instructions on getting a new solenoid valve as well as various other parts, check the parts manual for the refrigerator: Frigidaire refrigerator parts manual Hello Christine, the actual code

fan remained on & the door wouldn't open.What can be the problem? I had to unplug it and let it stand for a few mins for the door to open. I read the instruction manual carefully but there was nothing

...stand)fan stops spinning. The rear grille is held in place by a really big plasic nut. As it's self-assembly, it wouldn't be a bit surprised if the nut is in-place on the fan-body & you've missed ...