Questions & Answers for: st 45

...45/6915? There is 4 buttons 2 in the left (adj atthe top and mode at the buttom) and 2 in the right. (ST/STP at the top and light at the buttom). Could you please let me know how to set this watch. ...

ST/STP button to turn off the hourly CHIME and the ALARM chime. Hope this helps!! K~~ I used the instructions on the Armitron sight (www.armitron.com) for the model 45/6963 (page 2 of ladies digital).

...45/6975: From the "Time Telling Mode" (date/time displayed): to set the date and time: Press "reset" unit the date disappears--release; press "mode", the "hour" will flash, press "st/stp" to adjust ...

...the driver for my RJ-45 Ethernet Connector. Any suggestions? Thanks. For whay ver of windows? All drivers available here ...

...45/6975: From the "Time Telling Mode" (date/time displayed): to set the date and time: Press "reset" unit the date disappears--release; press "mode", the "hour" will flash, press "st/stp" to adjust ...

...45/6975: From the "Time Telling Mode" (date/time displayed): to set the date and time: Press "reset" unit the date disappears--release; press "mode", the "hour" will flash, press "st/stp" to adjust ...

...45/7012 Hold the reset button (upper left button) until the seconds start to blink.  To go to the hours, push the mode button (lower left button).  To set the hour, push the ST/STP button ...

TX jack on network adapter.SC male B to TX port on media converter.ST male B connector to the RX jack on network adapter.Connect media converter to network with Cat5e cable which uses RJ-45 connectors

...45/6963 Need directions for "A"., "B", "C" button version I have the same watch. I've figured out how change in and out of 24 hour time. 1. press and hold "ST/STP" until the month/day screen is ...

...ST 150 motor will not turn on but all lights on deck flash? Deck was playing then slowed down to stop. when i turned deck back on both 33rpm and 45 rpm lights flash then key lock and pitch rest as ...