Questions & Answers for: st1 antenna tuner Radio Communications

...antenna is the issue. Your radio has a cold solder on one of the chips. You need to reflow your transceiver board (the raised board on ST1) on other models, it's integrated into the main PCB. - To ...

Receiver not "receiving" The Sirius receiver installed in my 2007 Miata does not seem to be receiving the signal sent by Sirius. The recommended taking it to the dealer, but they are not the ones who ...

radio shows antenna not deteted or acquiring signal but does not work . antenna and all connections are good, ?? The problem is likely the actual connection inside the Starmate. It sounds like you ...

away. However, if my outdoor antenna shifts in the wind, I will lose the signal on the TV with the weaker tuner until the antenna is repositioned. If it shifts significantly, both TVs lose the signal.

...antenna" message with two different antennas, it is likely that the tuner itself is the problem.  You can get just the mini tuner ...

in tvs speed 40 printer all led light are blinking follow these steps 1) Press ST1+READY button together 2)Turn on the tvs speed 40plus passbook printer 3) The 4 LED will blink 4 times. Release the ...

...antenna tuner to my TV so that I can connect an antenna to the tuner. I have the CM-7001. I'm connecting through the HDMI port on the tuner to the HDMI port See above Confusing question! The CM-7001 ...

...TV to see if it has an ATSC tuner. Or, connect an antenna to your TV, run the channel scan (off-air antenna mode) to see if you get any local channels. If you don't, you'll need the external

...TV to see if it has an ATSC tuner. Or, connect an antenna to your TV, run the channel scan (off-air antenna mode) to see if you get any local channels. If you don't, you'll need the external

mfj-16010 schmatic schmatic Why not just google the above?? http://www.wimo.com/antenna-tuner-mfj_e.html http://www.wimo.com/antenna-tuner-mfj_e.html