Questions & Answers for: Pioneer src select

...SRC-button. Press function repeatedly until AUX is displayed. Press the rotary encoder to turn AUX on or off. DEH-P88RS: Press SOURCE and hold until the unit turns off. Press MULTI-CONTROL and hold ...

select ON. After selecting them to on, power the unit on and press the SRC to cycle thru the sources to find AUX 1 or 2. The owners manual is here if you need it; http://www.pioneerelectronics.com/pna

...SRC" button until radio turns off. Press and Hold "Audio" button until clock display turns on. Use the "select" right and left buttons to select the digit you want to change. Use the "volume" + and - ...

...SRC/OFF and hold until the unit turns off. 2) Press MULTI-CONTROL and hold until the initial setting menu appears in the display. 3) Turn MULTI-CONTROL to select the CLOCK settings. 4) Push ...

...SRC/OFF and hold until the unit turns off.
2. Press M.C. and hold until CLOCK SET appears in the display.
3. Turn M.C. to select the inital setting.
After selecting, perform the ...

Src/Off" button again until the clock displays in the unit screen. In some Pioneer units, hold the "Multi-Control" button until "Clock Set" appears in the display. 3 Press the "F" (Function) button on

...SRC/OFF and hold until the clock appears in the display. 3 Press F (function) to select the initial setting. After selecting, perform the following procedures to set the initial setting. 1 Press < ...

...SRC/OFF and hold until the unit turns off. Then press the Multi Control (M.C.) and hold until function name appears in the display. Turn M.C. select the initial setting. After selecting, perform the ...

...appears Turn the Multi-Control until "Clock" appears. Push Multi-Control Left or Right to select the segment, then Up and Down to change. Once the clock is set correctly, press the SRC button to

...SRC/OFF and hold until the clock shows on the display.3. Press "F" [function] to select the initial setting.After selecting, perform the following procedures to set the initial setting.1. Press <- ...