Questions & Answers for: Maytag sr 1100

Ad

Question about MAH8700A Front Load Washer

2 Answers

Error code "sr" I have a 2yr old Maytag MAH8700AWW and I'm getting the "sr" error code. I tried unplugging it, turning it off and on, and I get the error code reguardless of what I do? Any help would ...

Ad

...Sr. Unplug the range. Open the oven door. Remove the racks. Remove the 2 screws holding the bake element to the rear wall of the range. Carefully pull the element from the access holes in the rear ...

Ad

Question about MAH8700A Front Load Washer

2 Answers

what does the code Sr mean on a maytag neptune front load washer Technical Manual say "System Relay Failure" Diagnostic Code 34 When Sr appears I banish it for a few weeks or longer like this: (1) ...

Question about MAH8700A Front Load Washer

2 Answers

what does the sr mean? system relay failure. Sorry to say, but it means you have to replace the machine control board. See this page for a free but temporary solution.

Question about Neptune MAH6700A Front Load Washer

1 Answer

There is an intermittent chime going off and it is say SR-5 on the screen Found the manual which says it is a control problem and machine needs to be serviced.

Question about MAH8700A Front Load Washer

2 Answers

We own a maytag neptune washer and it keeps saying Sr what does that mean? need to replace mainboard This happens to my Neptune washer a few times a year. See this page for a simple "no tools" ...

Question about MAH8700A Front Load Washer

1 Answer

30 range get error message F2 F2 Oven over heat; defective Relay Board OR defective Sensor. The sensor should measure 1100 ohms @ room temp or 75 f. If it is open shorted or not withing range of 1100 ...

Question about MAH8700A Front Load Washer

1 Answer

oven does not work after cleaning, shows F1 on screen The "F1" fault code indicates an error in the electronic oven control circuitry. The failure is most likely the electronic oven control board and ...

Question about Neptune MAH5500B Front Load Washer

1 Answer

maytag neptune mah5500b sr code During the last spin cycle the unit stops with a sr code. about 5 min. later the door unlocks and you have to statt over Machine control is attempting to drive the ...

Error code "sr" on a Maytag MAH8700AWW. What does it indicate and how do I fix it? You might check the following link... it's another website similar to FixYa, which has a question similar to yours: ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machine Experts

Sheldon Dedek

Level 3 Expert

912 Answers

Brad Brown

Level 3 Expert

18520 Answers

jdthefixer

Level 3 Expert

747 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...